FRITSJURGENS FULLY CONCEALED PIVOTING DOOR HINGE

Absolute control over the movement of the pivot door. Now possible with the System M pivot hinge of FritsJurgens:

• 500 Kg bearing capacity
• Hold closed positions at 0˚
• Hold open positions at 90˚and -90˚
• Self-closing from -125˚ to + 125˚
• Fully adjustable whilst in the door
• 40mm minimum door thickness
• 91mm minimum distance from the pivot point to the side of the door
• Minimum dimensions around the door for fitting: Below:11 mm. Above: minimum 4 mm, maximum 10 mm
• Adjustable closing damping (soft close)
• Hydraulic backcheck (wall protection)
• Patented, made 100% in The Netherlands
• Fully installed in the door and not the floor
• Top & bottom plates available in SS & black
• Winner of the “Red Dot Design” award 2019
• Unlimited door height and up to 5 meters wide
• No cutting into concrete slabs or timber floors
• Tested & guaranteed to minimum of 1,000,000 cycles
• No unsightly large floor plate to visually interrupt the look & feel of the floor
• Two-year manufacturer’s guarantee

WHICH MODEL IS RIGHT FOR YOU?

Click here for an easy to use calculator or use the chart below.

POSITIONING

System M pivot door hinge is highly suitable for:

 

            360° Rotation                                           90° Rotation

WHAT’S INCLUDED

CEILING PLATE

A stainless-steel ceiling plate is fitted in the ceiling. The pin of the top pivot fits seamlessly into the hole in the ceiling plate.

 

TOP PIVOT

The top pivot is integrated into the top of the door and uses a so-called pin/hole connection. The pin is fixed to the top pivot and drops into the hole in the ceiling plate when this is turned.

 

SYSTEM M

System M pivot hinge is integrated into the lower part of the door. The oval base of the hinge is inserted into the slot in the floor plate.

 

FLOOR PLATE

A stainless-steel floor plate with an oval recess is fitted to the floor. The base of the hinge fits seamlessly into the recess in the floor plate.